 No.03085
Mamesick Senior Tester
Nov 23, 2008, 07:38
edited on: Nov 23, 2008, 07:41
|
Someone in 0.127u1 changed a bit in the eeprom data read function. I think this is the cause but at the moment I cannot compile and verify by myself. From: res |= input_port_read(machine, "EEPROM") & 0x0c; /* test switch */To: res |= input_port_read(machine, "EEPROM") & 0x0d; /* test switch */ |
|---|---|
 No.03088
robiza Developer
Nov 23, 2008, 10:45
|
you have right i'll committ the change |
|
No.03089
robiza Developer
Nov 23, 2008, 10:47
|
fix by mamesick |
 No.03091
Fujix Administrator
Nov 23, 2008, 15:39
|
Updated Mantis configuration to allow assigning Senior Tester level users to bugs. I changed mamesick to Senior Tester and updated the report accordingly. |
|
No.03092
etabeta Developer
Nov 23, 2008, 16:03
|
This fix is wrong. This way you're not reading anymore the eeprom bit (previously the reading was done setting res = eeprom_read_bit(); at the beginning, now the reading is done through a PORT_CUSTOM) the correct fix is probably to set IP_ACTIVE_HIGH the 0x01 bits in both PORT_START("EEPROM") |
|
No.03093
Mamesick Senior Tester
Nov 23, 2008, 17:29
|
Etabeta is right. The result is the same but correct fix is set to IP_ACTIVE_HIGH bit 0x01 in the eeprom input port. |
|
No.03098
robiza Developer
Nov 24, 2008, 02:04
|
fixed with etabeta suggestions |